The Best Budget Miter Saws For 2023

HORIZONTAL HANDLE: For a secure hold

MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility

BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts

Maximum Output : 1,950 W

MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM

THUMB ACTUATED POSITIVE STOPS: For quick miter adjustments

ELECTRIC BRAKE: Halts the rotation of the blade within seconds preventing unintended cuts

LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability

LARGE TABLE: Offers better material support with vice clamping system to secure work piece

WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty

2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree

Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically

Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops

The mitre saw features the precise miter system and machined base fence support

Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch

Without changing blades, This saw is designed to cut a wide range of materials

Powerful 10 amp hi-torque motor with optimized gearbox & blade system

8- 1/4in x 2- 1/2in max cross cut capacity with a 0° - 45° bevel tilt and a 50˚ - 50˚ miter that covers all common cutting angles accurately

Includes laser guidance, 10 ft power cord, 3 piece Clamp, integrated carry handles, and dust bag

Manufacturers 3 year limited warranty

DUAL BEVEL – Perform cuts in four positive stop positions at 48° & 45° left, 0°, and 45° right

CUTS AT COMMON ANGLES - Cuts up to 50 degrees left and right with 11 positive stops at most used angles

POWERFUL 15 AMP MOTOR - Delivers 4,800 RPM for quick, detailed cuts

2x12 CUTTING CAPACITY – Cross cuts lumber up to 2x12 at 90 degrees, and 2x8 lumber at 45 degrees

LED SHADOW LINE - Provides high precision cuts with greater accuracy than lasers

Positive miter stops at 9 settings: 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts)

Dual post compound pivoting arm

Features powerful 15 amp motor and dual post compound pivoting arm

Miter cuts 0°-45° left and 0°-52° right

Provides a large capability with cuts 52 degrees right and 47 degrees left with 9 positive stops at 15, 22-1/2, 30, 45 degrees left or right and 0 degrees

Saw includes vertical vise, blade, wrench and triangular rule

Bevel cuts up to 45° to the left

Durably designed with a machined aluminum base, dual aluminum base, dual slide rails and a carbide tip blade

Covered by 1-Year warranty

Powerful 15 AMP direct drive motor for improved performance; 4,600 RPM

Capacity – cuts Nominal 4x4 and 2x6 at 90° and 2x6 with one pass

Bevels left - from 0°- 47°, cuts Nominal 2x6 at full bevel

Lightweight unit is easy to move from room to room or even from job to job

Works with virtually all miter saw stands

Spindle lock holds spindle securely while bade nut is loosened and removed

Powerful 15-amp motor cuts boards up to 12 inches wide and 3-1/2 inches thick

Includes a 10-inch 40-tooth carbide-tipped blade, two table extensions, one clamp assembly, a dust bag, a dust port adapter, and a two-year warranty

Features a 7-1/2-inch crown molding nested capacity and a 6-3/4-inch base board vertical capacity

Miter 45 degrees in either direction (featuring 9 miter stops) or bevel 45 degrees to the left

Onboard class II laser guide illuminates your line of cut

SLIDE CAPABILITIES: The mitre saw has 8-inch cross cut at 90-degree and 5-1/2-inch cross cut at 45 degree

PORTABILITY: Lightweight design with side carry handles

POWERFUL MOTOR: 3,800 RPM motor of CRAFTSMAN miter saw is made for cutting 2X dimensional lumber, hardwoods, baseboard and trim with ease

QUICK AND ACCRUATE: 9 casted miter detent stops for adjustments

ACCURACY AND VISIBILITY: LED cut line positioning system

ADDED CAPACITY: The sliding miter saw cuts 3-5/8-inch nested crowns and 3-1/2-inch baseboards vertically

SINGLE CHARGE: Makes up to 585 cuts in 3-1/4-inch MDF baseboard** on a single charge

LARGE PIVOTING FLIP FENCE: Raises 4" for cutting crown molding vertically

Same tools. New name. Hitachi power tools has renamed to Metabo HPT

HANDLE: Horizontal handle with soft, vibration reducing elastomer grip adds comfort and control

10" Compound Miter Saw with Laser

MOTOR: 15 Amp motor, powerful for the toughest cutting jobs

BEVEL ANGLE RANGE: 0-45 degree bevel angle range, to the left with adjustable bevel stops for precision cuts

LASER MARKER SYSTEM: Increased cutting accuracy

INCLUDES: C10FCH2S Miter Saw, 10" 24T TCT Saw Blade, Pivoting Flip Fence, Dust Bag, Vise Assembly (322952), 10mm Box Wrench (940543), 4mm Hex Bar Wrench, Material Support Extension

LIGHTWEIGHT: Only 26. 5 lbs making it a great saw to carry to the job site

MITER ANGLE RANGE: 0-52 Degree miter angle range to the right and left for increased flexibility

HIGH-POWERED MOTOR - Comes standard with a powerful 1800 watt, 120V~60HZ, 15 amp motor.

PRECISION CUTTING - The advanced laser alignment system ensures accurate cuts every time!

BLADE CHANGES MADE EASY - The push-button shaft lock mechanism allows for simple, quick blade changes.

VERSATILE DESIGN - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Cuts wood, plastic and aluminum (with correct blade). Cutting Capacity: Cross cut at 90 degrees: 3” x 12" (80 x 300 mm), Miter cut at 45 degrees: 3" x 8" (80 x 200 mm), Miter and Bevel compound cut at 45° and 45°: 1.5" x 8" (40 x 200 mm)

PARTS INCLUDED - Dust Bag, Hold Down Clamp, Table Side Extension Bars, Rear Stabilization Bar and 10-Inch Saw Blade with Carbide tipped teeth