The 10 Best Makita Circular Saw, Tested And Researched
By, Sandra EspinetUpdated
Makita is a well-known brand for power tools. They have a wide range of power tools and accessories. Their product quality is excellent and most of their products are durable.
Moreover, they offer good after sales service. All these features make makita the best option for purchasing all your power tool needs. And, if you’re looking to buy the best makta circular saw then here are some factors that you should keep in mind while buying one.
To get the results you will read next is thanks to the hard work of our team during 14 hours of product research and analysis. As a direct consequence of this, we were able to identify Makita 5007Mg Magnesium 7-1/4-Inch Circular Saw as the top model for this year. The performance of this product is of an excellent standard, and it offers a complete set of features that can satisfy your requirements.
Our Top Picks
- Two built in L.E.D lights illuminate the line of cut for increased accuracy
- 1 year warranty
- Magnesium components create a lightweight saw (10.6 pounds) that is well balanced and jobsite tough
- Makita built electronically controlled BL motor delivers 6, 000 RPM for maximum performance and 50% longer run time per charge
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- Powered by two LXT batteries; x2 LXT technology delivers more power, speed and run time without the hassles of a cord
- 6 to 1/2 inches blade delivers a 2 to 1/4 inches cutting capacity for a wide range of cutting applications
- Heavy gauge, precision machined base for smooth, accurate cutting and added durability
- Weighs only 7.3 pounds with battery (battery not included) for reduced operator fatigue
- Delivers the trusted performance of the Makita 5007F 7-1/4" circular saw with the capacity to cut 4x lumber in a single pass
- Large cutting capacity (3-13/16" at 90° and 2-11/16" at 45°)
- Powerful 15 amp motor delivers 4, 300 RPM with power to cut beams, engineered lumber, and timber
- Well balanced design for superior handling and performance
- Ideal for framers, builders, masons and siding contractors
- Large cutting capacity (2-3/8" at 90°, 1-3/4" at 45°)
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- 3-3/8" blade delivers a maximum cutting depth of 1" for a wide range of cutting applications
- Makita-built motor delivers 1,500 RPM for faster cutting
- Adjustable cutting depth from 1" at 90° and 5/8" at 45°
- Electric brake for maximum productivity
- Weighs only 32.1 lbs. for increased operator comfort
- Ideal for cutting large timber, pressure treated lumber and wood logs
- Large cutting capacity (2-3/16" at 90° and 1-9/16" at 45°)
- Variable speed control dial (2,000-5,200 RPM) enables user to match the speed to the application
- 12 AMP motor with variable speed control dial (2,000 - 5,200 RPM) for optimum performance in a variety of materials
- Automatic Speed Change technology adjusts cutting speed and torque during cut for optimum performance
- Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita-built electronically controlled brushless motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge
What to Look For in a best makita circular saw?
You may know that best makita circular saw is a kind of product many customers are hesitant to pay for. It is not due to its quality but the fact that there are many factors you must consider. Nevertheless, all your worry is not a problem for us. Our knowledgeable staff will help you with the right decision.
Tech-evaluated and high-rated products are available in our list of eligible items. Here are some indispensable things you shouldn’t ignore:
Blade Size And Type
A circular saw's efficiency is not only affected by its size but also the type of blade it uses. The majority of circular saws reviewed have wood-cutting knives with a small number of teeth per in (TPI) Blades that have a greater TPI can be used to make metal and other delicate materials more easily.
Power Rating
Cordless circular saws can be measured by the voltage of the batteries. The majority of individual circular saws can deliver 16-18, 20 or more volts. A circular saw with a rating of 20 volts is the best choice if you are looking for a strong one.
Shoe Material
Steel is a less well-known material than it was once. It's very expensive and strong, but also extremely heavy.
- Aluminium is lighter than steel, but it's also more costly and less durable.
- Magnesium is the best high-tech metal for circular saw shoes. It is approximately 30% lighter than aluminum. - --- ---- Magnesium, which is much stronger than aluminum and steel (in some cases), can be made easier but it's also more costly.
Additional Features
Manufacturers offer a built in rafter hook as an additional feature to their saws. The hooks can be hung from ladders, sawhorses, and other sturdy ledges. They are able to swivel off the saw. They have been used by builders for many years to attach them to saws. Manufacturers are starting the trend.
Adjustment
Safety Features
Speed
Sidewinder Vs. Worm Drive
A worm drive circular saw has a motor at the back and a set worm gears by the blade. Sidewinders are shorter, heavier, and more powerful than worm drive circular saws. Worm drives have a tendency to decrease speed, but also increase torque. The gears also need oil, and users are advised to check the oil level daily.
Corded Vs. Cordless
A corded circular saw is best if the majority of your work will take place at home and you don't plan on taking it with you. A cordless circular saw is a better choice if the tool you require can be carried around with you without electricity.
FAQs
What Additional Features Should A Circular Saw Have?
There are many other features that the circular saw has, most of which can be used to aid and decrease manual labor. The electric brake is a vital feature we recommend you look out for. It can save your life.
Can I Use The Circular Saw To Cut Metal?
A circular saw's primary purpose is to cut wood, and all types of wood material. The circular saw can be irreparably damaged if you try to cut stone or meta. A metal cutting powertool is necessary if you plan to cut metal.
What Is The Purpose Of Circular Saws?
The essential DIY tool, a circular saw uses a rotating blade to cut straight lines. Although circular saws were originally used for cutting 2x4s and plywood, you can also equip them with other blades to make masonry and metal cuts.
Why Is My Circular Saw Stuck?
Your cutting angle, or your blade could be the reason your blade is clinging to your cutting material. Before you use your circular saw, make sure that your blade is clean, straight and sharp.
How To Use A Circular Saw?
First, remove the box from which the circular saw came. The next step is to check if your circular saw came with a batter. If not, it's time to buy one. Hold the circular saw in your hands and press the "ON” button. The motor will be powered up and the circular saw will start to spin.
Are Circular Saw Blades Universally Acceptable?
No! Saw blades come in many sizes, as we have already mentioned. You can only use the circular saw's maximum size saw blade. To ensure you are familiar with the correct blades for your circular saw before you start to use it, make sure that the entire manual is read.
Are Circular Saws Dangerous?
A circular saw may cause injuries, but there are some precautions you can take in order to use it safely.
- Wear eye- and ear protection
- If you are cutting materials that produce a lot of dust or debris, wear a dust mask.
- Wear loose clothes and other accessories to avoid getting caught on the blade of your tool.
- For maximum control, you should use both hands to operate the circular saw.
- Before you set the circular saw, wait for it to stop.
How Can You Maintain A Straight Line With A Circular Saw?
To keep your circular saw in a straight line, clamp one end of the workpiece to it and then run the base against the edge. You can also place a clamp at the base's front to serve as a guide.
What Is The Difference Between A Miter And A Circular Saw?
Both a circular saw or a mitersaw use sharp rotating blades to cut wood and other materials. However, the design differences of both tools can impact how they are used. Circular saws, for example, are hand-held tools designed to cut plywood and 2x4s quickly. Miter saws, stationary tools, make precise and angled cuts with a moving arm. This is great for cutting ornamental pieces such as crown molding or baseboards.
Our website is constantly updated so that the information you read becomes the latest one. Please visit our website or subscribe to our newsletter list more than normal to catch up with the new best makita circular saw of 2023.
Please feel free to contact us whenever you need support. You’re welcome to get in touch with us!
About Sandra Espinet
